Equipment
Eyepiece
DigiMount Adapter
Type Required
Opticron Spotting Scopes

HR60 / HR60SR / HR66GA / HR66GAED / HR80GA
The DigiMount Adapter with the Insert Collar in it would normally be fitted by being slid-over the eyepiece and locked in place.

Some eyepieces have a lip on them. For most of these it will not be possible to pass the DigiMount Adapter over this lip with the Insert Collar still in place.
Those affected are marked *

To use these particular eyepieces with the DigiMount Adapter the Insert Collar should first be removed from the DigiMount Adapter outer body and slid over the eyepiece. The eyepiece with the Insert Collar attached should then be fitted to the scope.

The DigiMount Adapter outer body can then be slid over the eyepiece, fitted onto the Insert Collar and securely locked into place.

For convenience, it will probably be best to leave the Insert Collar permanently fitted around the eyepiece on the scope so that the DigiMount Adapter can be easily fitted and removed when needed.

* 20xWW HDF (60/66)
40810

* 27xWW HDF (80)
40810
Type S1

22xWW HDF T (60/66)

30xWW HDF T (80)
Type L5


28xWW HDF (60/66)
40809T

38xWW HDF (80)
40809T
Type L5

28xWW HDF (60/66)
40809

38xWW HDF (80)
40809
Type L7

* 38xWW HDF (60/66)
40858
Type L7

44xW HDF (60/66)
40859
Type S2

* 52xWW HDF (80)
40858
Type L7

60xW HDF (80)
40859
Type S2

70xW HDF (60/66)
40860
Type S2

88x HDF (60/66)
40861
Type S2

95xW HDF (80)
40860
Type S2

120x HDF (80)
40861
Type S2

20x - 60x HDF Zoom
Type L5

20-60x HR (60/66)
40821


27-80x HR (80)
40821
Type S2

ES80 GA / 45
* Please see notes above

* 23xWW
40810
Type S1

25xWW HDF T
Type L5

 

32xWW
40809T

 
Type L5

* 32xWW
40809
Type L7

20x - 60x HDF Zoom
Type L5